Acid Separation, Catalytic Oxidation and Coagulation for ATC Waste Liquid Treatment

It is difficult to treat 2-amino-thiazoline- 4-carboxylic acid (ATC) waste liquid effectively at present for its characteristics of high chemical oxygen demand (COD), high salinity and low biodegradability. In order to solve this problem, this paper presents several kinds of physical-chemical treatment unit techniques, including acid separation, catalytic oxidation and coagulation. First of all, acid separation was adopted to precipitate relevant organics at isoelectric point. When the temperature and pH value of acid separation were controlled at about 5 ℃ and 2.2 respectively, the COD removal rate could reach 27.6%. Secondly, oxidation was used to break chemical constitution of refractory organics. The optimal reaction parameters of catalytic oxidation should be 20 ℃, pH adjusted to 5.0 and Fe^2 ] 300 mg/L. Then with 5% H2O2 added and after one-hour reaction, the COD removal rate could achieve about 52%. Finally, coagulation was adopted to remove a portion of refractory organics, and 15% polymeric molysite flocculant was the best for the coagulation, and the COD removal rate could reach about 15%. Therefore, the proposed feasible process of physicalchemical pretreatment for ATC waste liquid could have about 70% COD removed in total.

Acid Separation, Catalytic Oxidation and Coagulation for ATC Waste Liquid Treatment

It is difficult to treat 2-amino-thiazoline-4-carboxylic acid (ATC) waste liquid effectively at present for its characteristics of high chemical oxygen demand (COD), high salinity and low biodegradability. In order to solve this problem, this paper presents several kinds of physical-chemical treatment unit techniques, including acid separation, catalytic oxidation and coagulation. First of all, acid separation was adopted to precipitate relevant organics at isoelectric point. When the temperature and pH value of acid separation were controlled at about 5 ℃ and 2.2 respectively, the COD removal rate could reach 27.6%. Secondly, oxidation was used to break chemical constitution of refractory organics. The optimal reaction parameters of catalytic oxidation should be 20 ℃, pH adjusted to 5.0 and Fe2+] 300 mg/L. Then with 5% H 2O 2 added and after one-hour reaction, the COD removal rate could achieve about 52%. Finally, coagulation was adopted to remove a portion of refractory organics, and 15% polymeric molysite flocculant was the best for the coagulation, and the COD removal rate could reach about 15%. Therefore, the proposed feasible process of physical-chemical pretreatment for ATC waste liquid could have about 70% COD removed in total.