| 圆柱凸轮A轴联动加工宏程序编写方法研究 |
| |
| 引用本文： | 黄庆专,郑德耀. 圆柱凸轮A轴联动加工宏程序编写方法研究[J]. 成都航空职业技术学院学报, 2013, 29(3): 56-59 |
| |
| 作者姓名： | 黄庆专 郑德耀 |
| |
| 作者单位： | 福建电力职业技术学院,福建泉州,362000;福建电力职业技术学院,福建泉州,362000 |
| |
| 基金项目： | 基金项目：本文系福建电力职业技术学院立项资助项目《复杂造型与多轴编程加工项目课程开发》（编号：2012-JY004）研究成果之一. |
| |
| 摘 要： | 通过分析凸轮滑槽的组合曲线，写出各段曲线方程表达式，再算出各基点及相关X轴、A轴坐标，编制实现圆柱凸轮滑槽加工的数控宏程序。使用该方法编制圆柱凸轮加工程序的模式适用于带A轴联动的数控铣床和加工中心。
|
| 关 键 词： | 圆柱凸轮 宏程序 组合曲线 A轴联动 |
Research Into Compiling Method of Macro Program with A Axis Linkage Machining for Cylindrical CAM |
| |
| HUANG Qingzhuan,ZHENG Deyao. Research Into Compiling Method of Macro Program with A Axis Linkage Machining for Cylindrical CAM[J]. Journal of Chengdu Aeronautic Vocational & Technical College, 2013, 29(3): 56-59 |
| |
| Authors: | HUANG Qingzhuan ZHENG Deyao |
| |
| Affiliation: | 1.2. Fujian Electrical Vocational and Technical College, Quanzhou, Fujian 362000, China) |
| |
| Abstract: | This paper analyzes the combined curve of CAM curves, works out the basis points and the coordinates related to X alize the chute machining of cylindrical CAM. It is suitable for the chute, writes out the equation expressions of all the axis, A axis, and compiles the NC macro program to re- machining center with A axis to use the method to corn-pile a machining procedure of cylindrical CAM. |
| |
| Keywords: | cylindrical CAM macro program combined curve A axis linkage |
| 本文献已被 维普 万方数据 等数据库收录！ |
